Controls (Urban)

Bleubird

Last Update 2 years ago

Hold down the power button on the control unit on the left handlebar until the display comes on.


Select a level of pedal assist using the + and - buttons on the controls. Pedal assist level 1 is the lowest level of assist and pedal assist level 5 is the highest level of assist. Level zero will provide no assistance.


Engage walk assist mode by pressing and holding the button on the controls. This will engage the motor on a low power as an aide when walking with the e-bike. Use caution so as not to engage walk assist mode unwittingly.


In general, electric e-bikes are heavier than their non-electric counterparts. This makes walking the e- bike a more strenuous activity. To make walking the e-bike easier, your Urban e-bike is equipped with walk assist mode. If you hold down the down arrow on the controls, the motor will engage at a speed similar to a slow walk. When the walk assist mode is engaged a 'walk' indicator will appear on the display. To deactivate walk assist mode simply release the down arrow on the controls.


When first riding your e-bike, take care to start slowly in a low level of pedal assist. Take your first ride in a safe area away from cars, other cyclists, pedestrians, or other potentially dangerous obstacles. Only move up the pedal assist levels when you feel comfortable and confident and you have ample experience operating your new e-bike riding your e-bike. The higher pedal assist levels will accelerate you to higher speeds more quickly. Take care when riding the e-bike at any speed.


Failure to adhere to warnings and guidelines in this manual can lead to serious harm, injury, or death. Damage sustained by the e-bike from failing to follow instructions, guidelines and warnings in this manual is not covered under Bleubird's warranty.

Was this article helpful?

0 out of 1 liked this article

Still need help? Message Us