Display & Power
Bleubird
Last Update 2 years ago
Briefly press the power button to switch on the e-bike system.
When the display is on, hold the power button for 2 seconds to turn the system off. When the e-bike system is off it will not use battery power.
When the e-bike is not in use for 5 minutes, the system will automatically turn off to conserve power.
Upon start-up the e-bike system will display the real-time speed and trip distance by default. Press the control 'i' button to switch between the following
trip display options:
> Trip distance
> Odometer (overall distance travelled)
> Max speed
> Average speed
> Trip time travelled
To activate the walk assist function, press and hold the control - button. After 2 seconds the e-bikes drive is activated at a speed of <6 km/h and the screen will display the below icon. The walk assist function is disengaged as soon as you release the - button on the controls.
To switch on the front light hold the + button on the controls. The backlight brightness of the display is automatically reduced. Hold the + button again to switch the front light off.
Briefly press the + or - button to switch between assistance levels. This changes the motor output power. The output power is zero on Level 0. Level 1 is the minimum power. Level 5 is the maximum power.